Bat Caddy X3R/ X4R/ X8R Remote – Perceptive Golfing

My Cart

Close

ANY QUESTIONS? Call Us.

800-852-3144

BAT CADDY

Bat Caddy X3R/ X4R/ X8R Remote

$87.32 $103.99

Remote Controls for Bat-Caddy X3R, X4R & X8R models (FCC approved).

 

 X3R/X4R/X8R 2014 and later models - will not work on earlier models carts.

 

 2013/14 & prior model years: Remote control has internal antenna and On/Off switch (does not work on 2014 and later models)

 

 2013/14 & prior model years - Obsolete

Replaced by model above for all 2013/14 & prior model years.

 

 

IMPORTANT: Please select your caddy model year when ordering.

Previous and current model year remote controls are NOT interchangeable and will not work on other model years!

 

New Add-On: Bat-Caddy Remote Cliphanger to prevent "pocket-dials" and drop damage.

For more details, see  https://www.perceptivegolfing.com/collections/bat-caddy-accessories/products/bat-caddy-remote-control-cliphanger

 

 

HOW DO I SYNCHRONIZE MY REMOTE?

 

Remote from 2014-present (remote with a RED STOP button and an ON/OFF switch)
Step #1 - Power your caddy off for at least five (5) seconds.
Step #2 - Hold down the stop button on the remote. Make sure the remote is powered on and the red light comes on.
Step #3 - Continue to hold down the stop button and power up cart.
Step #4 - Continue to hold down the stop button until the LED light on the handle blinks.
Step #5 - Cart is now in "sync".
Test each function to assure all are functioning. You are ready to go!

 

 Remote from 2010-2013 (remote with a BLUE STOP button and an ON/OFF switch)

Step #1 - Power your caddy off for at least five (5) seconds.
Step #2 - Hold down the forward button on the remote. Make sure the remote is powered on and the red light comes on.
Step #3 - Continue to hold down the forward button on the remote and power up the cart.
Step #4 - Start counting slowly. Before you count 15 the cart will start to move (make sure nothing is in front of it and hold the handle).
Step #5 - Cart is now in "sync".
Test each function to assure all are functioning. You are ready to go!

 

Remote from 2010-2013 (remote with a wire antenna)
Step #1 - Power your caddy off for at least five (5) seconds.
Step #2 - Hold down the forward button on the remote. Make sure the red light comes on.
Step #3 - Continue to hold down the forward button on the remote and power up the cart.
Step #4 - Start counting slowly. Before you count 15 the cart will start to move (make sure nothing is in front of it and hold the handle).
Step #5 - Cart is now in "sync".
Test each function to assure all are functioning. You are ready to go!

 

Remote from 2010 and earlier (the controller...not the remote...has a green button)
Step #1 - Remove controller cover and expose the controller.
Step #2 - Find the green button on the small plastic side of the controller
Step #3 - Power-up cart. Press and hold-in the green button on the controller
Step #4 - While holding the green button in, start pressing and releasing the forward button on the remote. Process may take 5-15 seconds.
Step #5 - Cart is now in "sync".
Test each function to assure all are functioning. You are ready to go!

 

For Technical Support please contact one of our Service Centers.

All contact numbers and e-mails, including Sales & Marketing and Administration can be found on Bat Caddy's website under Contact Us.